GG No. 21, 427- Tenders of 25th April 2025

LANDS AUTHORITY

The Chief Executive Officer, Lands Authority, notifies that:

Sealed tenders in respect of the following advertisements have to be deposited in the tender box at the Lands Authority, Auberge de Baviere, Valletta, by 10.00 a.m. on Thursday, 8th May, 2025.

Advt No. 11. Sale tale quale of the premises at No. 6, Sqaq Sant'Elija, Tas-Sliema, as shown edged in red and marked letter 'A' and letter 'B' on the plan P.D.2023_0089_A. The site marked in red with letter 'A consists of level zero (0) and the subterranean only, and the site marked in red with letter 'B' consists of all levels. This property is in a dilapidated state and in need of immediate maintenance. All expenses required to restore this property are to be borne by the winning bidder. Tenders are to be accompanied by a bid-bond for an amount of €10,572 as stipulated in the tender conditions. Offers below the amount of one hundred and fifty-seven thousand and two hundred euro (€157,200) will not be considered. This tender may be subject to the right known as the right of first refusal as per article No. 32 of Chapter No. 573 of the Laws of Malta. A fee of €50 will be charged for the tender documents.

Advt No. 12. Lease for a period of fifteen (15) years for commercial purposes of a shop tale quale, at No. 2, Triq Fuq San Pawl, Cospicua, as shown edged in red on the plan P.D.2009_399. The airspace of this shop is not included with this tender. This property is being offered in its present state including any latent defects. Tenders are to be accompanied by a bid-bond for an amount of €4,350 as stipulated in the tender conditions. Offers below the amount of one thousand and four hundred and fifty euro (€1,450) per annum will not be considered. This tender may be subject to the right known as the right of first refusal as per article No. 32 of Chapter No. 573 of the Laws of Malta. A fee of €50 will be charged for the tender documents.

Advt No. 13. Lease tale quale, on a year to year basis, for agricultural purposes, of a site and structures at L-Imwieġel in the limits of Żurrieq as shown edged in red on plan P.D.2019_0075_A. This property may be subject to any existing servitudes. The bidders must be either full-time or part-time farmers, who have to submit a certificate, issued by the Department of Agriculture with the tender document or students who have completed successfully an academic course relating to agriculture within the previous five years prior to the introduction of the Legal Notice No. 573.06 who have to submit a copy of the relevant certificate also with the tender documents. Tenders are to be accompanied by a bid-bond for an amount of €1,161 as stipulated in the tender conditions. Offers below the amount of three hundred and eighty-seven euro (€387) per annum will not be considered. This tender may be subject to the right known as the right of first refusal as per article No. 32 of Chapter No. 573 of the Laws of Malta. A fee of €50 will be charged for the tender documents.

These advertisements are being published as an invitation to the public to acquire tender documents online. The bidders are to refer to all the conditions of the tender document and are invited to carefully read these conditions. Tenders should be submitted only on the prescribed form, which together with the relevant conditions and other documents, may be obtained by clicking on 'Buy Tender' on the webpage where these tenders are available on (https://landsauthority.org.mt/services/tendering/). A fee of fifty euro (€50) must be paid through the online system of the Lands Authority website by using your preferred banking card.

25th April, 2025

Malta Digital Innovation

Authority

Quotation for the Provision of 3D Printing

Training ‒ RFQ 19/2025

The Service Provider shall offer a short term advanced digital skill training course, to support the upskilling and reskilling of the workforce in the Maltese Ecosystem as part of the DiHubMT's services.

DiHubMT

The DiHubMT, part of MDIA, has curated a comprehensive catalogue of services designed to support startups and SMEs in their digital transformation journey. As Malta's European Digital Innovation Hub, DiHubMT belongs to a network of hubs established by the European Commission's template, providing essential assistance to accelerate digital transformation.

1. Service Requirements

A comprehensive 4-week learning program (20 hours) at the DiHubMT premises (Twenty20 Business Centre, Triq l-Intornjatur, Zone 3, Central Business District, Birkirkara CBD 3050, Malta), on Advanced 3D Printing technology to equip participants with the knowledge and skills to master advanced 3D printing techniques, including the understanding of 3D printing principles and various printing technologies.

The training course is to delve into the fundamentals of Advanced 3D Printing by:

Exploring advanced printing techniques for expanding design and production capabilities;

Discovering the diverse applications of Advanced 3D Printing across various industries;

Understanding core concepts to advanced techniques;

Providing practical applications across various industries

The training is to include:

Hands-on training;

Interactive learning;

Post-processing methods to achieve high-quality finishes for 3D printed parts;

Practical understanding of this transformative technology

Course Materials is to include:

Comprehensive course lectures and presentations;

Tutorials and resources on advanced printing techniques and post-processing methods;

Case studies of innovative Advanced 3D Printing applications across various industries;

Practical lab sessions utilizing the 3D Printers available at DiHubMT;

Sample Course Descriptor on Advanced 3D Printing Training

Module 1: Advanced 3D Printing Technologies and Materials

Introduction to high-performance 3D printing materials, including composites and metal printing;

Advanced additive manufacturing techniques: SLA, SLS, DMLS, and hybrid printing processes;

Optimizing material properties for industrial applications;

Case studies on cutting-edge material applications in aerospace, automotive, and medical sectors

Module 2: Computational Design and Simulation for 3D Printing

Topology optimization and generative design for lightweight and high-performance components;

Finite Element Analysis (FEA) for evaluating part performance before printing;

Integration of AI and machine learning in 3D printing workflows;

Hands-on session with advanced CAD tools for parametric modeling and simulation

Module 3: High-Precision 3D Printing and Quality Control

Techniques for achieving high-resolution and precise prints;

Advanced calibration, slicing strategies, and real-time monitoring of print quality;

Non-destructive testing methods for validating 3D printed parts;

Quality assurance and certification standards for industrial 3D printing

Module 4: Multi-Material and Multi-Process 3D Printing

Techniques for combining different materials in a single print;

Hybrid manufacturing approaches: Merging 3D printing with CNC machining and injection molding;

Practical applications of multi-process fabrication in the industry;

Hands-on training on multi-material printing and post-processing integration

Module 5: The Future of Advanced 3D Printing

Emerging trends in nanoprinting, bioprinting, and 4D printing;

Exploring the role of sustainability and eco-friendly materials in additive manufacturing;

Impact of blockchain and digital twins in securing 3D printing supply chains;

Group discussions on disruptive applications and the next wave of innovations in 3D printing

Target Audience:

Engineers and Designers seeking to integrate advanced 3D printing into their workflows;

Professionals in manufacturing and prototyping interested in exploring advanced applications;

Hobbyists and Makers looking to expand their skillset in advanced 3D printing technology

2. Quotation Requirements:

The service provider shall forward the CV(s) of the person(s) delivering the course.

A detailed outline of the course content, ensuring consistency with the provided sample course descriptor.

A description of the hands-on training approach; including the types of advanced printing techniques covered (multi-material, multi-colour, hybrid manufacturing) and the advanced 3D printing technologies available for hands-on sessions (FDM, SLA, SLS, DMLS, etc.).

3. Quotation Conditions:

This request for quotes is for up to €4980.00 Excl. VAT.

The Service Provider shall attend a 1-hour introductory meeting at DiHubMT upon award of this RFQ.

The Service Provider shall offer flexibility in scheduling training sessions, accommodating both morning and afternoon slots as determined by DiHubMT.

The Service Provider shall incorporate the logos provided by MDIA into all of the course content.

Any software used for the training must be open-source, or the necessary licenses must be supplied by the service provider.

The Service Provider shall submit the course content to DiHubMT for review and approval before delivery.

The service provider shall submit presentation slides and all course materials to DihubMT prior to the commencement of the course.

DihubMT representatives reserve the right to review and implement any necessary amendments to any of the course content.

All course materials provided by the Service Provider to the Malta Digital Innovation Authority (MDIA) shall become the exclusive property of the MDIA upon receipt.

The MDIA reserves the right to decline any offer, even the most advantageous one.

By submitting an offer, the person submitting the quotation is declaring that the person does not fall under any of the grounds listed under Part VI of LN352/2016 (S.L.601.03).

Payment shall be made upon fulfilment of all requirements outlined in this Request for Quotes.

Clarifications can be forwarded up to Friday, 30th May, 2025.

Quotations are to be forwarded by Monday, 5th May, 2025.

25th April, 2025

Ministry for agriculture, fisheries

and animal rights

Expression of Interest

Provision of Services as Winch Attendants

in various localities

The Department of Fisheries and Aquaculture within the Ministry for Agriculture, Fisheries and Animal Rights notifies that sealed Expression of Interest will be received at the Department of Fisheries and Aquaculture, Government Farm, Triq l-Ingiered, Marsa, on the day and time indicated below:

Date Published: Monday, 28th April, 2025

Closing Date: Monday, 5th May, 2025, at noon

EOI No. MAFA EOI 002/2025. Provision of services by legal or natural persons as winch attendants for the duration of three (3) years, as requested by the Department of Fisheries and Aquaculture.

The services required shall include but not exclusively limited to the following:

i. Opening and closing of assigned winch room(s) when hauling of vessels is required by fishermen;

ii. The service provider/s must accept all of the above requirements in writing as a condition on the service contract. any potential conflict of interest, prior to or during provision of service, must be declared by the service provider/s.

Location of Winch Rooms:

Marsaxlokk St Thomas Bay

Application forms may be obtained free of charge from the Department of Fisheries and Aquaculture, Government Farm, Triq l-Ingiered, Marsa, on any working day from 8.30 a.m. to 2.00 p.m. until the closing date.

25th April, 2025

CENTRAL PROCUREMENT AND SUPPLIES UNIT

The CEO for the Central Procurement and Supplies Unit (CPSU), Ministry for Health and Active Ageing, notifies that:

Electronic tenders in respect of the following notices will be received till 9.30 a.m. of Friday, 16th May, 2025, Tenders are to be submitted ONLY online on (www.etenders.gov.mt) for the:

CFT 014-3432/25. Supply and delivery of HDPE non-degradable yellow plastic bags for the disposal of bio-hazardous waste for Gozo General Hospital

CFT 014-3433/25. Supply of qty 50 nickel metal hydride batteries with connector and resettable thermal fuse for the Gozo General Hospital

CFT 021-3434/25. Supply of Clonazepam (TZF) 2mg tablets

CFT 021-3435/25. Supply of Deferasirox 180mg film-coated tablets

CFT 009-3436/25. Supply and delivery of qty 25 one (1) seater manual operated recliners

CFT 021-3437/25. Supply of Calcium Folinate injection

CFT 021-3438/25. Supply of Morphine Sulphate/Hydrochloride 100mg tablets

CFT 021-3439/25. Supply of Iron tablets/capsules

CFT 020-3440/25. Supply of 0.5% Chlorhexidine in 70% alcohol or in an equivalent alcoholic base

CFT 021-3441/25. Supply of ketogenic formula 4:1

CFT 020-3442/25. Supply of PVA foam embolization particles

CFT 014-3443/25. Supply of QTY 10 Weigh Scales with Stadiometer for the Various Wards and Sections at the Gozo General Hospital

These tender documents are free of charge.

Tender documents are only obtainable from the Electronic Public Procurement System (www.etenders. gov.mt). Registration is required in order to make use of this website. Maltese economic operators need to be in possession of their organisation eID in order to access this website. More information is available from the FAQ section of the same website.

25th April, 2025

CENTRAL PROCUREMENT AND SUPPLIES UNIT

The CEO for the Central Procurement and Supplies Unit (CPSU), Ministry for Health and Active Ageing, notifies that:

Electronic tenders in respect of the following notices will be received till 9.30 a.m. of Friday, 23rd May, 2025, Tenders are to be submitted ONLY online on (www.etenders.gov.mt) for the supply of:

CFT 021-3430/25. Indomethacin 25mg tablets/ capsules

CFT 021-3431/25. Zonisamide 100mg capsules

These tender documents are free of charge.

25th April, 2025

CENTRAL PROCUREMENT AND SUPPLIES UNIT

The CEO (Sourcing and Supply Chain Management) for the Central Procurement and Supplies Unit within the Ministry for Health and Active Ageing, notifies that submissions for the below listed ERU Competitive Calls will be received up to 10.00 a.m. on Monday, 28th April, 2025.

ERU2204U25 – Devices

ERU2204U25 – Medicinal

ERU2204U25A – Medicinal

ERU2204U25B – Medicinal

ERU2204U25C – Devices

ERU2204U25D – Medicinal

ERU2204U25E – Medicinal

ERU2204U25F – Devices

ERU2204U25G – Medicinal

Emergency Response Unit (ERU) Competitive Calls can be downloaded from the CPSU website.

Submissions for this call for competition are to be submitted as per instructions given in the dossier.

25th April, 2025

CENTRAL PROCUREMENT AND SUPPLIES UNIT

The CEO (Sourcing and Supply Chain Management)for the Central Procurement and Supplies Unit within the Ministry for Health and Active Ageing, notifies that submissions for the below listed ERU Competitive Calls will be received up to 10.00 a.m. on Tuesday, 29th April, 2025.

ERU2304U25 – Devices

ERU2304U25 – Medicinal

ERU2304U25A – Medicinal

ERU2304U25B – Medicinal

Emergency Response Unit (ERU) Competitive Calls can be downloaded from the CPSU website.

Submissions for this call for competition are to be submitted as per instructions given in the dossier.

25th April, 2025

Xewkija LOCAL COUNCIL

The Xewkija Local Council notifies that:

Tenders will be received by the Xewkija Local Council till Friday, 9th May, 2025, at 10.30 a.m., for:

Advt No. XLC/03/2025. Street cleaning during the feast of Xewkija using a low emission service vehicle.

Tender documents are free of charge and are to be viewed/downloaded and submitted ONLY through the etenders website (www.etenders.gov.mt).

Any clarifications or addenda to the tender document will be uploaded and available to view and download from this same website.

The Local Council reserves the right to refuse any offer, even the most advantageous.

25th April, 2025